Forums | Search | Archives

All Forums  Cool Edit  Change Wave Ouput Device for all tracks?

Author	Topic
pryorjn1 Posts: 3	Posted - Thu Apr 10, 2003 5:10 am  Hi, This is probably a RTFM question, but I just recently downloaded CEP v2.1 (and I like it so far :-)) and noticed a difference from v2.0 in applying a change of the wave input/output device to all tracks in multitrack view. The main difference is that I don't know how to do it anymore . I used to do it by clicking in the gray area to the left of the track, but now doing this brings up a different dialog box to change the wave input/output devices (as well as other settings). I can't find an "apply to all tracks" check box like there was in v2.0 (and 1.2). Has anybody stumbled accross a way to do this short of changing the main wave device settings? Thanks in advance for any help. -Josh Pryor
ozpeter Location: Australia Posts: 3200	Posted - Thu Apr 10, 2003 8:05 am  Click 'Vol' or 'Bus' (not 'Eq') in the three little buttons normally above the track control display, and then you'll see the 'Out' buttons beside each track - when you press one of those you'll see your 'same for all tracks' box. I don't think there is any change there. - Ozpeter
	Topic

Page: